Setup impacts for above and underground features

Support Administration
1

  1. In the Project Home / Project administration page, select the “System Height Impacts” panel.

  2. Select the System for which you want to setup the impact factor. You must enable 3D impacts for that system.

    adm-3d-reqsel.png353×135 2.71 KB

  3. Choose an impact if the feature is above or underground. Users can draw features either above or underground. If there is a conflict, with the feature being above or underground.

<img src=“/uploads/default/original/1X/8ae99bfb1add7a2aaab3af24f33dbd360d75c5df.png” width=“487” height="500>

  1. To finalize, click on the “Set Height Impacts” button.