# Setting system target

**URL:** <https://community.geodesignhub.com/t/setting-system-target/68>\
**Category:** Administration\
**Created:** [January 5, 2017, 11:41am UTC](https://community.geodesignhub.com/t/setting-system-target/68 "2017-01-05T11:41:11Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![hrishiballal](https://community.geodesignhub.com/user_avatar/community.geodesignhub.com/hrishiballal/32/2_2.png) [@hrishiballal](https://community.geodesignhub.com/u/hrishiballal)\
**Post date:** [January 5, 2017, 11:41am UTC](https://community.geodesignhub.com/t/setting-system-target/68/1 "2017-01-05T11:41:11Z")

</div>

For some systems, especially when there is spatial allocation, there may be a target associated with them. e.g., for this plan, 50 hectares of housing is required. This target can be set in the system administration panel.

1. Click on the “Add target” link.  
 ![](https://community.geodesignhub.com/uploads/default/original/1X/c1b170c80e28555bbb3749dde700b5e3b5349411.png)

2. In the modal window that appears set the target as an integer or decimal value.  

[![](https://community.geodesignhub.com/uploads/default/original/1X/5081d58faeb27b0c0ef7c06729d452ac916ff0bd.jpeg "Project Administration: Add target to a system") ](https://www.youtube.com/watch?v=lUQX0antQUQ)