# Setting system constraint relations

**URL:** <https://community.geodesignhub.com/t/setting-system-constraint-relations/69>\
**Category:** Administration\
**Created:** [January 5, 2017, 11:43am UTC](https://community.geodesignhub.com/t/setting-system-constraint-relations/69 "2017-01-05T11:43:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![hrishiballal](https://community.geodesignhub.com/user_avatar/community.geodesignhub.com/hrishiballal/32/2_2.png) [@hrishiballal](https://community.geodesignhub.com/u/hrishiballal)\
**Post date:** [January 5, 2017, 11:43am UTC](https://community.geodesignhub.com/t/setting-system-constraint-relations/69/1 "2017-01-05T11:43:26Z")

</div>

All design happens within constraints; constraints behave like evaluation models and change the geometry of diagrams. Sometimes constraints do not apply to some systems, so as a project administrator you can turn on or off the constraints calculation depending on how you want to setup the project. By default, constraints _if added are enabled on all systems_.

1. In the “Manage Systems” panel, click on the “Constraints” link.  
 ![](https://community.geodesignhub.com/uploads/default/original/1X/140c50a602bfc0d73750bc1cecad4f053ad8e2b8.png)

2. Select if you want to turn the constraints calculation on or off.  

Note: Turning on constraint calculations means that the computation will be slower thereafter by about 20%.
